What is the integer quantum Hall effect?

And why is it so amazing?

Surprises [about physics in two dimensions] occurred in the 1980s when it became possible to study Landau levels [the quantised energy levels of electrons in a magnetic field] in Flatland. This happens when the electrons are completely constrained to move in only two dimensions. The surface within which the electrons move needs to be extremely flat and free from defects and impurities. Advances in semiconductor technology in the 1970s led to two realisations of this Flatland. Both were developed for technological reasons: the desire to have transistors in which the electrons and holes can move extremely fast. One class of device is silicon MOSFETs (Metal Oxide Semiconductor Field Effect Transistors). The second class is heterostructures, where layers of ultrapure semiconductors such as gallium arsenide are grown on top of each other, one layer of atoms at a time. In both classes of device, a fixed density of electrons (or holes) can be injected at the surface. These charge carriers can move freely in Flatland, acting like a fluid. Things get interesting when the number of charge carriers is small enough and the magnetic field is large enough that the number of charge carriers is comparable to the number of quanta of magnetic flux that pass through the system. Then, the quantum state of most of the charge carriers is one of the lowest Landau energy levels. 

To achieve this regime for the cleanest possible systems requires magnetic fields more than a hundred thousand times stronger than that of the Earth. Furthermore, the magnetic field must be spatially uniform in the region where the semiconductor system is located, stable over the time of the measurements, and the interior of the electromagnet producing the field must be large enough to contain a refrigerator that can cool the charge carriers in the system down to a few degrees above absolute zero. By 1980, all these conditions became possible. Klaus von Klitzing was able to perform measurements of the Hall resistance versus magnetic field in a special high magnetic field laboratory in Grenoble, France. The results were surprising and are shown schematically in Figure 35. There are four noteworthy features. 

 

Figure 35. The quantum Hall effect. The Hall resistance is shown as a function of the strength of the magnetic field and has a step-like structure. The integer n is related to the quantized energy that the charge carriers have.

First, there are distinct steps in the curve. At small magnetic fields the Hall resistance versus field is a straight line, as expected for the classical Hall effect. However, at larger fields there are plateaus in the curve.

Second, each of the plateaus is extremely flat. Von Klitzing found that the magnitude of the Hall voltage on each plateau did not vary to one part in ten million. As he varied the magnetic field, he noticed that the first seven digits on the voltmeter he was using did not change. He wondered if the voltmeter was broken and had become jammed. But it was working.

Third, the magnitude of the Hall resistance for all the plateaus has a simple relationship to fundamental physical constants. The quantum of resistance is defined as equal to h/2e^2 . When you calculate this quantity, the answer (25,812.827 ohms) is in the units of electrical resistance. The value of the Hall resistance is precisely equal to this value divided by an integer (n=1,2,3 …) which is related to the highest quantized energy (Landau level) that an electron can have at that magnetic field. That is why it is known as the integer quantum Hall effect.

Fourth, the observed value of the Hall resistance for each of the plateaus is independent of many details, including the temperature, the amount of disorder in the material, the chemical composition of system (silicon versus gallium arsenide), or whether the charge carriers are electrons or holes.

These four features are similar to those for the steps associated with the macroscopic quantum effects (magnetic flux in superconducting cylinders, circulation in a superfluid, Josephson effects) discussed in the previous chapter. Again, it is astonishing that a macroscopic measurement – of electrical resistance - of a macroscopic system can determine fundamental constants that are normally associated with properties of atomic systems. Just as the Josephson effect led to a new standard measure for voltage, the quantum Hall effect led to a new standard measure for electrical resistance.

Anyone familiar with building electronic circuits will have used resistors of varying values in ohms (Ω), e.g., 10 Ω or 25 kΩ. When these resistors are made, they are calibrated against some standard. For making integrated circuits with billions of transistors this standard needs to be extremely accurate. In 1990 the international standard for the ohm was changed to be that defined by the quantum Hall effect. Previously, the ohm was defined by the electrical resistance of a column of liquid mercury with constant cross-sectional area, 106.3 cm long, a mass of 14.4521 grams and a temperature 0 °C. Like the Josephson voltage standard, the quantum Hall resistance standard has the advantage of precision, portability, reliability, reproducibility, and independence of platform. 

An extract from Topology Matters, Chapter 8, Condensed Matter Physics: A Very Short Introduction.